Your Complete DIY Guide to Laying a Driveway for Your Home

A driveway is one of the smartest additions that you can make for your home. It can help prevent erosion, provide a good surface to walk and ride on, and improve your property’s overall appearance and value. However, building it can be very challenging especially when you choose to do it yourself. Fortunately, such a task is not beyond your capabilities if you have basic knowledge in paving. With all the necessary tools and concreting materials, such as those from Best Bar, on hand, here are the steps to follow in laying a driveway for your home:

1. Create a plan.

Plan the design of your driveway carefully so it will be durable, functional, and aesthetically pleasing. The most important factors to consider include access to the street, terrain, and obstructions, like trees or large rocks.

2. Estimate costs.

You will have to calculate the amount of materials that you will need to complete the project, including the cement, forms, and concrete mesh. Also, you should take into account the cost of any equipment that you will use during the entire process.

3. Perform the necessary measurements.

Determine a preferred width for your driveway and check if it is doable. The typical width for a single lane drive is eight feet, but you can chose to make it wider if space allows.

4. Make the lay out.

Drive stakes at points where your driveway will run along and then tie lines on them to get a picture of the path.

5. Install the forms.

Considering the typical thickness of your driveway is four inches, use 1×4 or 2×4 lumbers as forms and anchor them with stakes. If you are building a curving drive, use plywood that is sturdy enough to hold the concrete load.

6. Pack the base.

Create a solid base for the pavement by packing the soil and the base material (gravel) that you will use. It is best to rent a plate compactor for this task.

7. Place the reinforcing mesh.

Tie in place the reinforcing mesh preferably at the middle part of the forms to ensure that the slab will be durable. The best materials that you can use for reinforcement are rebars, reinforcing fibres, or concrete steel mesh from trusted suppliers, such as Best Bar.

8. Pour the cement.

Using a concrete truck, wheel barrow, or whichever equipment you prefer, carefully pour the cement into the forms. As this is a delicate part of the project, it is best to seek help from a concrete pumping contractor to do the job for you.

9. Do the finishing touches.

Using a push broom, ensure you get the surface flat to prevent standing water on it. Make sure that it is not too smooth to offer traction for your car.

10. Cure the concrete.

Use a curing compound to create a moisture-retaining barrier on the concrete’s surface to prevent it from drying out too quickly and ensure it achieves it maximum strength when it dries. Avoid using the driveway during the curing stage, which is typically at least three days.

11. Remove the forming materials.

Clear away the forms and start using your driveway!

While building a driveway can be costly and labour-intensive, it can be very rewarding. Just make sure you only use quality concreting materials, such as the driveway mesh from Best Bar, to achieve the best results for your project.

 

Business Name: Best Bar
Name: Best Bar Reinforcements Wangara
Address: 100 Callaway St, Wangara WA 6065
Phone: (08) 9303 4950
Logo URL: https://www.bestbar.com.au/wp-content/uploads/2015/09/logo.png
Tagline: Best Bar is a leading Australian steel reinforcement supplier
Trading Hours: 06:00 - 16:30
Trading Days: Mon-Fri
Year Founded: 1995

Leave a Reply

Your email address will not be published. Required fields are marked *